Washer Not Spinning

Washer Not Spinning? Here’s What You Should Know

If your washing machine isn’t spinning, don’t rush to replace it. In many cases, the fix is simpler than you think. Let’s break down what could be wrong and how you can solve it—either on your own or with help from local repair experts.


Common Reasons Why Your Washer Won’t Spin

Common Reasons Why Your Washer Won’t Spin

Several issues can prevent a washing machine from spinning properly. The most common include:

  • Overloaded Drum
    Too many clothes in the washer can throw the drum off balance and stop the spin cycle altogether. Try removing some items and running the spin cycle again.
  • Faulty Door Lock
    If the washer doesn’t register that the door is fully closed, it won’t spin for safety reasons. Listen for a click when closing the door—no click might mean the latch is defective.
  • Broken Drive Belt
    A loose or snapped drive belt means the motor can’t rotate the drum. You may hear the motor running without any movement inside.
  • Blocked or Failing Drain Pump
    A clogged drain can keep water in the drum, preventing spin. If the washer isn’t draining properly, check the filter and drain hose for debris.
  • Control Board Issues
    If all mechanical parts seem fine, the problem might lie in the control board or sensors. These issues usually require a technician’s help.

Step-by-Step Troubleshooting Guide

Step-by-Step Troubleshooting Guide if your Washing Machine Won't Spin
  1. Balance the Load
    Uneven distribution of clothes is a common reason for spin failure. Rearrange or reduce the load.
  2. Check the Door
    Open and firmly close the door. Restart the machine and listen for locking sounds.
  3. Inspect the Drainage
    Remove the drain filter (usually near the bottom front panel) and clear out any lint or objects.
  4. Look Under the Lid (for top-loaders)
    If the lid switch is broken, it won’t signal the machine to spin. Press it manually to test.
  5. Try a Reset
    Unplug the washer for 5–10 minutes. Sometimes a soft reset clears software glitches.

When to Call a Professional

If the belt is damaged, the motor is faulty, or the control panel malfunctions, it’s best to contact a licensed technician. DIY fixes can sometimes make the problem worse or void the warranty.

For fast, reliable washer repair in Toronto, visit Washer Repair Toronto. Their team handles all major brands and offers same-day service for urgent cases.