Home / Front-load washer repair
★★★★★ 4.7 · 415 Google reviews★★★★★ 4.8 · 91 HomeStars reviews

Front-load washer repair in Toronto

Door boots, drain filters, bearings, dampers and control boards — front-loaders are our daily bread. Same-day service across Toronto.

$25 OFF online

Book your washer repair

Tell us what’s wrong — we’ll confirm a time, usually same day.

    Why front-load washers fail differently
    Front-loaders

    Why front-load washers fail differently

    Front-load washers are efficient and gentle on clothes, but their design brings a few signature faults: moisture trapped behind the door boot, a filter that quietly clogs, and a heavy drum on bearings and dampers that take a beating every spin.

    That’s why the most common front-load calls we see are mould and leaks at the door seal, a machine that won’t drain, and a loud, shaking spin. All of them are fixable — and most are done in a single visit.

    • Door boot mould, tears and leaks
    • Clogged drain-pump filter (the “coin trap”)
    • Worn shock absorbers and bearings
    • Door-lock and control-board faults
    Pricing

    Front-load repair prices

    Typical labour for the repairs that apply to your washer type. Parts are quoted separately; you approve the price first.

    Quick fix · up to $199Standard · up to $249Major · up to $299
    Standard repairFront & top-load

    Drain pump replacement

    Won’t drain
    The pump that pushes dirty water out has jammed, burned out or filled with debris.
    $199–249labour
    $99$299
    Book this repair
    Standard repairFront & top-load

    Water inlet valve

    Won’t fill
    The solenoid that lets hot and cold water in has failed, so the tub fills slowly or not at all.
    $199–249labour
    $99$299
    Book this repair
    Standard repairFront & top-load

    Motor control board

    Dead, erratic, error codes
    The “brain” of the washer. Failed relays or a power surge can stop the motor, pump or display.
    $199–249labour
    $99$299
    Book this repair
    Quick fixFront & top-load

    Drive belt replacement

    Won’t spin or agitate
    A stretched or snapped belt means the motor runs but the drum or agitator does not turn.
    $99–199labour
    $99$299
    Book this repair
    Standard repairFront-load

    Door boot seal / gasket

    Leaks at the door, mould smell
    The rubber bellows around the door has torn, hardened or filled with mould.
    $199–249labour
    $99$299
    Book this repair
    Quick fixFront & top-load

    Lid switch / door lock assembly

    Won’t start or lock
    The safety switch never “sees” the door closed, so the cycle refuses to begin or spin.
    $99–199labour
    $99$299
    Book this repair
    Standard repairFront-load

    Shock absorbers

    Vibrates, walks, loud
    The dampers that hold the drum steady are worn, so the machine shakes during spin.
    $199–249labour
    $99$299
    Book this repair
    Major repairFront & top-load

    Tub bearing replacement

    Grinding, roaring spin
    Worn drum bearings roar and grind during spin and can eventually damage the tub.
    $199–299labour
    $99$299
    Book this repair
    Major repairFront-load

    Spider arm assembly

    Corroded drum support
    The aluminium spider that supports a front-load drum has corroded or cracked.
    $199–299labour
    $99$299
    Book this repair
    Quick fixFront & top-load

    Water level / pressure switch

    Overfills or won’t fill
    The sensor that “reads” the water level is giving wrong signals to the control board.
    $99–199labour
    $99$299
    Book this repair
    Standard repairFront & top-load

    Timer assembly module

    Cycle stalls, skips steps
    The cycle controller is stuck or skipping steps, so the washer stalls mid-cycle.
    $179–249labour
    $99$299
    Book this repair
    Standard repairFront & top-load

    User interface / touchpad board

    Buttons or display dead
    The touch panel or display no longer responds or shows random codes.
    $179–249labour
    $99$299
    Book this repair
    Quick fixFront & top-load

    Drain hose replacement

    Slow drain, leaks
    A kinked, split or clogged hose is slowing the drain or leaking onto the floor.
    $99–199labour
    $99$299
    Book this repair
    Quick fixFront-load

    Coin trap / filter clearing

    Won’t drain, smells
    A blocked pump filter is the cheapest fix for a front-load that won’t drain.
    $99–199labour
    $99$299
    Book this repair
    Standard repairFront & top-load

    Tub seal replacement

    Leaks underneath
    The seal between tub and shaft has failed and water is seeping out underneath.
    $179–249labour
    $99$299
    Book this repair
    How to read these prices. Figures are labour only and show a typical range — the exact number depends on your model and how hard the part is to reach. Parts are quoted separately, and you approve the full price before any work begins. The service call fee is waived when you repair, and booking online takes another $25 off.
    Symptom finder

    Not sure which part has failed?

    Won’t start

    A washer that won’t power on is usually a faulty door latch or lid switch, a failed timer or a control-board fault. We test both the electrical and mechanical sides to pinpoint the cause.

    Most likely repairs · labour
    Lid switch / door lock assembly$99–199
    Motor control board$199–249
    Timer assembly module$179–249
    User interface / touchpad board$179–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Won’t spin

    If it fills but doesn’t spin, think worn belt, lid switch or a failed motor coupling. We check the drive system, transmission and spin control to get laundry moving again.

    Most likely repairs · labour
    Drive belt replacement$99–199
    Lid switch / door lock assembly$99–199
    Motor coupling$99–199
    Shift actuator$179–249
    Clutch assembly$199–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Loud noises

    Banging or roaring in a spin points to worn bearings, dampers or suspension — or something stuck in the drum. We run a full diagnostic before any part is touched.

    Most likely repairs · labour
    Shock absorbers$199–249
    Suspension rods$199–249
    Tub bearing replacement$199–299
    Spider arm assembly$199–299
    Typical labour
    for this problem
    $199–299
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Leaking water

    Leaks come from a handful of places: a split hose, a torn door boot, a failing pump or a worn tub seal. We find the exact source and give you a lasting fix.

    Most likely repairs · labour
    Door boot seal / gasket$199–249
    Drain hose replacement$99–199
    Tub seal replacement$179–249
    Drain pump replacement$199–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Won’t drain

    Standing water usually means a clogged pump or filter, a blocked hose or a control fault. We clear the drain path and replace whatever has failed.

    Most likely repairs · labour
    Coin trap / filter clearing$99–199
    Drain pump replacement$199–249
    Drain hose replacement$99–199
    Water level / pressure switch$99–199
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Won’t fill

    No water, or very slow water: a failed inlet valve, a bad water-level sensor or a control signal problem. We check the supply side and the electronics.

    Most likely repairs · labour
    Water inlet valve$199–249
    Water level / pressure switch$99–199
    Motor control board$199–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Smells bad

    Mould and bacteria love door gaskets and detergent drawers. We deep-clean, replace a damaged boot if needed and show you how to keep it fresh.

    Most likely repairs · labour
    Coin trap / filter clearing$99–199
    Door boot seal / gasket$199–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Error code / dead display

    Modern washers display codes for everything from door-lock failures to sensor faults. We decode the code for your exact brand and fix the cause, not just the symptom.

    Most likely repairs · labour
    Motor control board$199–249
    User interface / touchpad board$179–249
    Timer assembly module$179–249
    Typical labour
    for this problem
    $179–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Agitator won’t move

    Top-load agitator limp while the motor hums? Stripped agitator dogs or a worn belt are the usual suspects, and both are fast fixes.

    Most likely repairs · labour
    Agitator dogs$99–199
    Drive belt replacement$99–199
    Motor coupling$99–199
    Typical labour
    for this problem
    $99–199
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.
    FAQ

    Your questions

    Why does my front-load washer smell?

    Moisture and detergent residue collect around the door boot and in the drain filter. We deep-clean, replace a damaged boot if needed and show you how to prevent it — leave the door ajar after use and run a tub-clean cycle monthly.

    Why is my front-loader shaking violently?

    Usually worn shock absorbers, a damaged bearing or an uneven load. A technician can confirm which before any parts are ordered.

    How much does washer repair cost in Toronto?

    Most washer repairs fall between $99 and $299 in labour, depending on the part: quick fixes such as belts, lid switches and hoses are $99–$199, standard repairs like drain pumps and control boards are $199–$249, and major jobs like tub bearings are $199–$299. Parts are quoted separately and you approve the total before work starts.

    Do you offer same-day washer repair?

    Yes. We offer same-day washer repair across Toronto and the GTA whenever availability allows. Book online early in the day for the best chance.

    Is the service call really free with a repair?

    Yes. When you go ahead with the repair, the service call fee is waived — and booking online also takes $25 off.

    Washer acting up? Get it fixed today.

    Book online in a minute — same-day service, upfront pricing and $25 off your repair.

    Book online · $25 off