Home / Brands / Kenmore
★★★★★ 4.7 · 415 Google reviews★★★★★ 4.8 · 91 HomeStars reviews

Kenmore washer repair in Toronto

Front-load and top-load Kenmore washers repaired by certified technicians. Same-day service, upfront labour prices and $25 off when you book online.

$25 OFF online

Book your washer repair

Tell us what’s wrong — we’ll confirm a time, usually same day.

    Expert Kenmore washer repair
    Kenmore washers

    Expert Kenmore washer repair

    Kenmore appliances were built for Sears by several manufacturers, so two Kenmore washers can have completely different parts inside. We identify the maker behind your model number first, then source the right part.

    Models we service: front-load and top-load washers — standard, high-efficiency and smart versions.

    Symptoms

    Common Kenmore washer problems

    What we see most often on Kenmore machines — and the typical labour for each fix.

    Typical faults

    • Model-specific part confusion (Whirlpool-, LG- or Electrolux-built units)
    • Drain pump failure and clogged filters
    • Spin problems from worn belts or couplers
    • Door boot tears and slow leaks
    • Control board faults on Elite front-loaders

    Technician tip

    Have your model number ready when you book — it tells us who built your Kenmore and which parts to bring.

    See typical prices
    Pricing

    What a Kenmore repair costs

    Labour only — the same transparent ranges for every brand. Parts are quoted separately.

    Quick fix · 7 of 20 repairs
    $99–$199
    Small parts, quick jobs — often done in under an hour.
    • Drive belt replacement$99–199
    • Lid switch / door lock assembly$99–199
    • Agitator dogs$99–199
    • Water level / pressure switch$99–199
    • Motor coupling$99–199
    + 2 more in this tier
    Standard repair · 11 of 20 repairs
    $179–$249
    The most common repairs: pumps, valves, boards, seals.
    • Drain pump replacement$199–249
    • Water inlet valve$199–249
    • Motor control board$199–249
    • Door boot seal / gasket$199–249
    • Shock absorbers$199–249
    + 6 more in this tier
    Major repair · 2 of 20 repairs
    $199–$299
    Drum-level work on bearings and the drum support.
    • Tub bearing replacement$199–299
    • Spider arm assembly$199–299
    We’ll tell you honestly if a major repair is worth it — or if replacing is the smarter move. Try the calculator
    Symptom finder

    Quick diagnosis

    Tell us what your Kenmore is doing.

    Won’t start

    A washer that won’t power on is usually a faulty door latch or lid switch, a failed timer or a control-board fault. We test both the electrical and mechanical sides to pinpoint the cause.

    Most likely repairs · labour
    Lid switch / door lock assembly$99–199
    Motor control board$199–249
    Timer assembly module$179–249
    User interface / touchpad board$179–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Won’t spin

    If it fills but doesn’t spin, think worn belt, lid switch or a failed motor coupling. We check the drive system, transmission and spin control to get laundry moving again.

    Most likely repairs · labour
    Drive belt replacement$99–199
    Lid switch / door lock assembly$99–199
    Motor coupling$99–199
    Shift actuator$179–249
    Clutch assembly$199–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Loud noises

    Banging or roaring in a spin points to worn bearings, dampers or suspension — or something stuck in the drum. We run a full diagnostic before any part is touched.

    Most likely repairs · labour
    Shock absorbers$199–249
    Suspension rods$199–249
    Tub bearing replacement$199–299
    Spider arm assembly$199–299
    Typical labour
    for this problem
    $199–299
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Leaking water

    Leaks come from a handful of places: a split hose, a torn door boot, a failing pump or a worn tub seal. We find the exact source and give you a lasting fix.

    Most likely repairs · labour
    Door boot seal / gasket$199–249
    Drain hose replacement$99–199
    Tub seal replacement$179–249
    Drain pump replacement$199–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Won’t drain

    Standing water usually means a clogged pump or filter, a blocked hose or a control fault. We clear the drain path and replace whatever has failed.

    Most likely repairs · labour
    Coin trap / filter clearing$99–199
    Drain pump replacement$199–249
    Drain hose replacement$99–199
    Water level / pressure switch$99–199
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Won’t fill

    No water, or very slow water: a failed inlet valve, a bad water-level sensor or a control signal problem. We check the supply side and the electronics.

    Most likely repairs · labour
    Water inlet valve$199–249
    Water level / pressure switch$99–199
    Motor control board$199–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Smells bad

    Mould and bacteria love door gaskets and detergent drawers. We deep-clean, replace a damaged boot if needed and show you how to keep it fresh.

    Most likely repairs · labour
    Coin trap / filter clearing$99–199
    Door boot seal / gasket$199–249
    Typical labour
    for this problem
    $99–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Error code / dead display

    Modern washers display codes for everything from door-lock failures to sensor faults. We decode the code for your exact brand and fix the cause, not just the symptom.

    Most likely repairs · labour
    Motor control board$199–249
    User interface / touchpad board$179–249
    Timer assembly module$179–249
    Typical labour
    for this problem
    $179–249
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.

    Agitator won’t move

    Top-load agitator limp while the motor hums? Stripped agitator dogs or a worn belt are the usual suspects, and both are fast fixes.

    Most likely repairs · labour
    Agitator dogs$99–199
    Drive belt replacement$99–199
    Motor coupling$99–199
    Typical labour
    for this problem
    $99–199
    Book this repair · $25 offLabour only. Parts quoted separately; you approve the full price before we start. Service call waived with repair.
    Four steps

    How it works

    Book online

    Tell us the brand and the problem in about a minute. Booking online takes $25 off your repair.

    We confirm a window

    A technician is lined up for a same-day visit whenever availability allows — or the next available slot.

    Diagnosis & fixed price

    We find the fault, explain it in plain language and quote the full price. You decide — no pressure.

    Repaired & tested

    Genuine parts, a full test cycle and a satisfaction guarantee. The service call is waived when you repair.

    FAQ

    Kenmore washer repair — FAQ

    Do you repair Kenmore washers in Toronto?

    Yes. We repair Kenmore front-load and top-load washers across Toronto and the GTA, with same-day visits whenever availability allows.

    How much does a Kenmore washer repair cost?

    Labour for most Kenmore washer repairs runs from $99 to $299 depending on the part — quick fixes like belts and lid switches are $99–$199, pumps and boards $199–$249, and major drum work up to $299. Parts are quoted separately and you approve the total first.

    Are Kenmore washers worth repairing?

    Often yes. If the repair is under about half the price of a comparable new washer and the drum and tub are sound, repairing a Kenmore is better value. We’ll give you an honest opinion on site.

    Do you use genuine parts for Kenmore washers?

    Yes — manufacturer-approved parts, so the repair lasts and the washer performs as intended.

    Book your Kenmore washer repair

    Book online in a minute — same-day service, upfront pricing and $25 off your repair.

    Book online · $25 off